Wuhan UV LEDTek Co.,Ltd
Wuhan UV LEDTek Co., Ltd Leading of UV LED Solutions Supplier Manufacturer Exporter
Add to Cart
UV cures adhesives drying UV LED Area Curing System
A Led semiconductor is usually a small area (less than 2mm side) light source with limited power, so many of them are necessary to get enough UV light.
Photo Electronics uses custom made COB (chip on board) Led solution. With this sophisticated technology, LEDs arranged in a high-density matrix allow to reach high UV intensities (w/cm²) with a compact design. The UV power generated reaches the necessary level for curing paints, inks and other products with UV photoinitiators.
COBs LED is driven by electronic circuits, which allow a fine power control from 0 to 100% and are cooled by an electronically controlled ventilation system.
Special additional optics guarantee the maintenance of a high value of the emitted radiation, even at different distances from the surfaces to be cured, thus further improving the efficiency of the UV Led system.
COB technology allows getting a flexible UV Led lamp with a modular architecture, to meet specific customer needs.
With the rapid development of chip technology, the application of UV LED surface light source has been rapidly popularized, with higher illumination output, larger illumination area, more precise optical design, and more uniform illumination effect, satisfying fast and batch production. From the application to achieve differentiation, there is always a product to meet your needs.
LED UV Curing Light Main Features
1. Energy-saving: save 80% electrical energy than Mercury lamp
2. UV output adjustment: From 1% to 100%
3. Multiple control modes : Constant current, pedal control, intelligent optical and manual modes
4. Photoelectric induction, instant on/off, no preheating required.
5. No mercury, No Ozone, eco-friendly
6. The cold light source, low temperature
7. Stable output, high uniformity.
8. Large area of UV irradiation, batch production line operation
9. Seamless splicing, meet the demand for differentiation
10. BEST QUALITY Work-life more than 20000 hours for glue adhesive varnish curing uv curing machine
11. 365nm 395nm Handheld UV curing machine for glue adhesive varnish curing
LED UV Curing Light Specification
| Specification of UV LED Area Light | ||||||
| Light-emitting area(mm) | Size(L*W*H) | Weight (Kg) | Wavelength(nm) | Irradiation distance(mm) | Peak irradiance (mW/cm2) | Cooling method |
| 20*20 | 35*35*80 | 0.2 | 365/385/395/400 | 3-10 | 3000 | Air cooling |
| 40*40 | 60*60*100 | 0.2 | 385/395 | 3-10 | 3000 | Air cooling |
| 80*80 | 100*100*100 | 0.2 | 385/395/400 | 3-10 | 3000 | Air cooling |
| 100*100 | 110*110*122 | 2.5 | 395 | 3-10 | 1500-3000 | Air cooling |
| 200*100 | 220*110*122 | 2.5 | 385 | 3-10 | 1500-3000 | Air cooling |
| 200*200 | 220*220*122 | 2.5 | 385/395 | 3-10 | 1500-3000 | Air cooling |
| 120*120 | 150*150*122 | 2.5 | 385/395/400 | 10-20 | 1500-3000 | Air cooling |
| 300*50 | 330*80*150 | 4 | 365/385/395 | 10-20 | 1500-3000 | Air cooling |
| 500*90 | / | 6 | 365/385/395 | 10-20 | 1500-3000 | Air cooling |
|
1500*180 | / | 20 | 365/385/395 | 10-20 | 1500-3000 | Air cooling |
| Specification of UV LED Area Light | |||||||
| Light-emitting area(mm) | Size(L*W*H) | Weight(Kg) | Wavelength(nm) | Irradiation distance(mm) | Peak irradiance(mW/cm2) | Cooling method | |
| 20*20 | 35*35*80 | 0.2 | 365/385/395/400 | 3-10 | 3000 | Air cooling | |
| 40*40 | 60*60*100 | ||||||
| 80*80 | 100*100*100 | ||||||
| 100*100 | 110*110*122 | 2.5 | 3-10 | 1500-3000 | |||
| 200*100 | 220*110*122 | ||||||
| 200*200 | 220*220*122 | ||||||
| 120*120 | 150*150*122 | 10-20 | 1500-3000 | ||||
| 300*50 | 330*80*150 | 4 | |||||
| 500*90 | / | 6 | |||||
| 1500*180 | / | 20 | |||||
LED UV Curing Light Advantages:
LED UV Curing Light Application
1. Adhesive fixation of microloudspeaker
2. Cell Phone Motor
3. Disposable medical equipment UV bonding
4. Precision electronics,optics,semiconductor industry(Camera module)
LED UV Curing Light Application Pic:
